UNC School of the Arts- Speed Draping
Striped Blouse mockup- Draper and Stitcher
Mock up
Reference
The goal was to make a top as close to the picture as possible. I created an initial mock-up of the top before stripping the fabric to check my style lines and fit.
Renaissance sleeve mockup- Draper and Stitcher
The control sleeves end after the second slash section.
Pointed Sleeve mockup - Draper and Stitcher
This was an exercise in patterning sleeves, and the goal was to match the picture as best as we could. I ended up patterning the sleeve similar to a leg of mutton, but the top gets sewn together at the top to make the point before it’s set in.
UNC School of the Arts- Costume Tech 3
Dress - Draper and Stitcher
Mock up
reference
For this assignment, we were given a sketch and told to recreate the dress. I decided to create a flat pattern of mine, then made a mock-up, and finally went into fashion fabric once I had addressed fit and style. The skirt was cut on the bias while the top was cut straight of grain.
Radial Projection Trumpet Skirt- Draper and Stitcher
For this project, a drawing of the pattern was given for a trumpet skirt from a book, and the assignment was to use radial projection to get it to the correct size for the half-scale mannequin
UNC School of the Arts- Costume Tech 2
Mid Ballet Petticoat - Draper and Stitcher
Reference
For this project, we looked at a photo of a mid-ballet petticoat and translated it to half-scale. There was a big emphasis on capturing the proportions in the half-scale version
Mid 20th century Petticoat - Draper and Stitcher
Reference
For this project, we looked at a photo of a mid-20th century petticoat and tried to pattern something based on the photos and the measurements the photo had of the full-scale skirt.
